Top Bar
Your Trusted Miami-Dade HVAC Contractor

HVAC Installation Services

System struggling in August? On Point Construction sizes, installs, and replaces air conditioning across Miami-Dade, with load calculations done properly and permits handled.

Why Choose On Point Construction for Your HVAC Work

In Miami your air conditioner runs nearly year-round, which makes correct sizing more consequential here than almost anywhere else. An oversized unit short-cycles, never runs long enough to pull humidity out, and leaves you with a cold, clammy house. We calculate the actual load for your home rather than matching whatever tonnage was there before.

Outstanding Support

One point of contact who explains the sizing, the equipment options, and what you are actually buying at each price point.

Homeowner-Friendly Focus

Installations scheduled to minimize time without cooling, with portable units available on multi-day jobs during summer.

Transparent Pricing

Estimates that state equipment model, tonnage, efficiency rating, and what ductwork or electrical is included, so bids are actually comparable.
Untitled design 28
sized correctly

Core Components of Your Cooling System

The equipment is only one part of what determines whether your house is comfortable. All three of these matter.

Untitled design 1

Load Calculation & Sizing

Square footage, insulation, window area and orientation, and ceiling height fed into an actual calculation, rather than replacing like-for-like and hoping.

Ductwork Design & Repair

Correctly sized and sealed ducts with balanced returns, because the best equipment on a poor duct system still leaves you with hot rooms.

Airflow & Humidity Control

Verified airflow and run times long enough to actually dehumidify, which in this climate matters as much to comfort as temperature does.

Our HVAC team in Miami is the right choice for your installation.

stroke house
ww 2
comfort and efficiency

Energy‑Efficient Cooling Options

Cooling dominates a Miami utility bill. Efficiency choices made at installation follow you every month for the next fifteen years.

High‑SEER Equipment

Higher-efficiency systems that cost more upfront and less monthly, with an honest look at whether the payback period makes sense for how long you plan to stay.

Variable‑Speed & Inverter Systems

Equipment that modulates instead of cycling on and off, holding temperature more evenly and removing far more humidity than single-stage systems.

Duct Sealing & Insulation

Leaky ducts in a hot attic waste cooling you already paid for. Sealing and insulating the distribution system often returns more than upgrading the equipment.

Smart Controls & Zoning

Programmable and zoned controls so you are not cooling empty rooms at full output all afternoon.
what we install

Our Comprehensive HVAC Services.

On Point Construction handles system replacement, new installation, ductwork design and repair, and mini-split systems for additions and converted spaces.

how we work

Our Commitment to a System That Performs

You get the load calculation, not just a tonnage recommendation. Installations are documented, refrigerant charge verified, and airflow measured rather than assumed. We come back after startup to confirm the system is performing the way it was designed to.

stroke house
code and inspections

Safety Standards & Compliance You Can Count On

HVAC replacement is permitted work in Miami-Dade, and the mechanical inspection exists because incorrect installation causes real problems, from electrical faults to condensate damage.

01.

Permit Acquisition Support

We pull the mechanical permit with the correct municipality and file the equipment documentation required for the replacement or new installation.
02.

Scheduled Inspections & Documentation

Mechanical and, where applicable, electrical inspections scheduled and passed, with equipment documentation and warranty registration retained for you.
03.

Industry Best Practices for On‑Site Safety

Proper refrigerant handling and recovery, safe electrical disconnection, and secured equipment placement including hurricane tie-down for exterior units.
04.

Compliance Tracking at Every Stage

Condensate routing, disconnect placement, clearances, and equipment anchoring verified against code before final, since these are the common failure points at inspection.

HVAC Service Areas We Serve

on point forms
get a cooling quote

Request an HVAC Estimate



















    our location

    95 Merrick wy, Suite 325 Coral Gables, FL, 33134, USA

    quick contact

    Call Us: +1 (786) 209 7900 

    We will answer you within 24 hours via email, or you can call us directly, we are always ready to serve. Thank

    FAQ

    HVAC FAQ's

    A straight equipment swap is usually a single day. If ductwork needs replacement, the electrical needs upgrading, or the air handler is being relocated, expect 2 to 4 days. We schedule to minimize the time you are without cooling and can provide portable units on longer summer jobs.

    Yes. We pull the mechanical permit with the correct building department and handle the inspection through final. Replacement without a permit is common and it becomes a problem at resale.

    Through a load calculation based on your home’s square footage, insulation, window area and orientation, and ceiling height. Matching the old unit’s tonnage is the common shortcut and it is often wrong, particularly if windows, insulation, or the floor plan have changed since the original install.

    In Miami, more often than elsewhere, because your system runs so many hours a year that the efficiency difference compounds quickly. Whether it pays back for you depends on your usage and how long you plan to stay in the home. We will show you the math rather than just recommending the top model.

    Almost always an oversized system. It cools the air to setpoint fast, shuts off before it has run long enough to pull moisture out, and leaves you at a low temperature and high humidity. It is one of the most common problems we find, and it originates at sizing rather than at the equipment.

    Yes. Miami-Dade requires condensing units to be anchored to resist High-Velocity Hurricane Zone wind loads, and it is checked at inspection. Older installations frequently do not comply, and we correct it as part of any replacement.

    All of Miami-Dade County, including Coral Gables, Coconut Grove, Pinecrest, Palmetto Bay, South Miami, Key Biscayne, Miami Beach, Miami Shores, Brickell, Wynwood, Doral, Aventura, and Sunny Isles Beach.

    Yes. In this climate, systems run enough hours that coil cleaning, drain line clearing, and charge checks are genuinely preventive rather than upselling. A clogged condensate line is one of the most common causes of interior water damage we see.